MHD Tuning: Flash-Tune Your BMW with Your Smartphone

MHD Tuning: Flash-Tune Your BMW with Your Smartphone - Bimmer-Connect.com

MHD Tuning turns your phone into a complete ECU flashing tool for your BMW. Unlike a piggyback module, MHD rewrites the engine software (DME) directly – while keeping BMW's own safety and protection functions intact. You can return to the stock software at any time.

What can MHD do?

  • Off-the-shelf maps (OTS): ready-made Stage 1 and Stage 2 maps for pump fuel and ethanol blends.
  • Custom tunes: load maps created by your tuner, built on the MHD platform.
  • Flash options: add features to any map, e.g. exhaust burble (duration, aggressiveness, speed/rpm limits), cooling and boost options – depending on engine.
  • MHD+ features: map switching, flex fuel and antilag on supported platforms.
  • Datalogging & live gauges: monitor boost, timing, AFR and many more values while you drive.
  • Diagnostics: read and clear engine fault codes and reset adaptations.

Supported engines & devices

MHD supports BMW and Toyota Supra models with the N54, N55, S55, B58, S58, S63 and N13 engines (E, F and G series, depending on engine). Separate apps exist for N54, N55 (E series) and F+G series. The apps run on Android and iOS.

Note: on cars with the newest BMW software, a DME bench unlock may be required before OBD flashing – for B58/S58/S63 we offer the MHD Tuning Unlocker.

Which adapter do I need for MHD?

Adapter Connection Notes
MHD Universal WiFi Adapter WiFi E, F & G series. Sleep mode, fast ENET on F/G. Our recommendation for MHD.
xA Ultra WiFi Adapter WiFi BMW E (2003+), F & G series, Supra and MINI F series. Also works with xHP, bootmod3, MG Flasher and many more.
THOR OBDII WiFi Adapter WiFi E, F & G series – no B58 support on F series.
xHP Flashtool WiFi Adapter WiFi E, F & G series – no B58 support on F series.
BimmerGeeks Expert K+DCAN Cable Cable (Android) E series and F series flashing. Needs an OTG adapter.

Not sure which one fits your car? Check our Adapter FAQ or just ask us – we are happy to help before you order.

Get started

  1. Choose a compatible adapter from the table above.
  2. Download the MHD app for your engine from Google Play or the App Store.
  3. Buy your flasher license (and maps) in the app.
  4. Plug in the adapter, connect your phone and follow the in-app instructions. Keep the battery charged during the flash.

More information: mhdtuning.com

Licenses: what do I need?

  • Flasher License: unlocks flashing for your car – stock software with flash options, MHD OTS maps or custom maps from your tuner.
  • Map Pack: the OTS maps for a stage (e.g. Stage 1 or Stage 2). Alternatively, a Super License bundles all licenses for your engine.
  • You buy and redeem everything directly in the MHD app.

Which stage is right for me?

Choose the stage that matches the modifications on your car – MHD lists the recommended hardware under each stage in the app. Then select the fuel you actually use (RON/octane). If your car has modifications outside the common stages, a custom tune is the better choice.

The three types of flash

  • Full write: the first installation of MHD – takes the longest. Use a battery charger.
  • Long write: when you add or remove flash options with MHD custom code.
  • Map write: a short flash, e.g. switching from Stage 1 to Stage 2.

Checklist before every flash

  • Battery charger: connect a suitable charger, especially for the first (long) installation. A weak battery is the most common reason for a failed flash.
  • Consumers off: lights, climate control, seat heating and other accessories off; ignition on, engine off.
  • Phone ready: phone charged, screen lock/auto-sleep disabled, app updated beforehand.
  • WiFi adapter: download licenses and maps while you are online first, then switch your phone to flight mode with WiFi enabled and connect to the adapter.
  • Don't interrupt: keep doors closed, don't unplug the adapter and stay close to the car until the app confirms the flash.

FAQ

Can I go back to stock?
Yes – you can flash your car back to the original software at any time.

Which adapter for a B58 in the F series?
Use the MHD Universal or the xA Ultra. THOR and xHP WiFi adapters do not support the B58 on F series cars.

My car has the newest BMW software – what now?
Some newer DMEs need a bench unlock before OBD flashing. For B58, S58 and S63 engines we offer the MHD Tuning Unlocker.

Can I combine MHD with xHP?
Yes – MHD tunes the engine, xHP the automatic transmission. Both work with the same WiFi adapter.

Shop all adapters & cables